View GA1087_1085359.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

T
R
I
Q
U
I
N
T
S E M I C O N D U C T O R, I N C .
GA1087
FBIN GND REFCLK GND
11 10 9 8
F1
7
F0
6
GND
5
TEST 12 VDD 13
Phase Detector VCO
4 VDD 3 2
Q10 Q9
11-Output Configurable Clock Buffer
Features
* Wide frequency range: 24 MHz to 105 MHz * Output configurations: five outputs at fREF five outputs at fREF /2 or six outputs at 2x fREF four outputs at fREF * Low output-to-output skew: 150 ps (max) within a group
SYSTEM TIMING PRODUCTS
Q0
14
GND 15 Q1 Q2
16 17
MUX Divide Logic /4, /5, or /6 Output Buffers Group B Group A
1 GND 28 27
Q8 Q7
VDD 18
26 VDD
19
20
21
22
23
24
25
GND
Q3
Q4
VDD
Q5
Q6
GND
TriQuint's GA1087 is a configurable clock buffer which generates 11 outputs, operating over a wide range of frequencies -- from 24 MHz to 105 MHz. The outputs are available at either 1x and 2x or at 1x and 1/2 x the reference clock frequency, fREF . When one of the Group A outputs (Q5-Q10) is used as feedback to the PLL, all Group A outputs will be at fREF , and all Group B outputs (Q0-Q4) will be at 1/2 x fREF . When one of the Group B outputs is used as feedback to the PLL, all Group A outputs will be at 2x fREF and all Group B outputs will be at fREF . A very stable internal Phase-Locked Loop (PLL) provides low-jitter operation. Completely self-contained, this PLL requires no external capacitors or resistors. The PLL's voltage-controlled oscillator (VCO) has a frequency range from 280 MHz to 420 MHz. By feeding back one of the output clocks to FBIN, the PLL continuously maintains frequency and phase synchronization between the reference clock (REFCLK) and each of the outputs. TriQuint's patented output buffer design delivers a very low output-tooutput skew of 150 ps (max). The GA1087's symmetrical TTL outputs are capable of sourcing and sinking 30 mA.
* Near-zero propagation delay: -350 ps +500 ps (max) or -350 ps +700 ps (max) * TTL-compatible with 30 mA output drive * 28-pin J-lead surface-mount package
For additional information and latest specifications, see our website: www.triquint.com
1
GA1087
Functional Description
The core of the GA1087 is a Phase-Locked Loop (PLL) that continuously compares the reference clock (REFCLK) to the feedback clock (FBIN), maintaining a zero frequency difference between the two. Since one of the outputs (Q0-Q8) is always connected to FBIN, the PLL keeps the propagation delay between the outputs and the reference clock within -350 ps +500 ps for the GA1087-MC500, and within -350 ps +700 ps for the GA1087-MC700. The internal voltage-controlled oscillator (VCO) has an operating range of 280 MHz to 420 MHz. The combination of the VCO and the Divide Logic enables the GA1087 to operate between 24 MHz and 105 MHz. The device features six divide modes: /4, /5, /6, /8, /10, and /12. The Frequency Select pins, F0 and F1,
and the output used as feedback to FBIN set the divide mode as shown in Table 1. In the test mode, the PLL is bypassed and REFCLK is connected directly to the Divide Logic block via the MUX, as shown in Figure 1. This mode is useful for debug and test purposes. The various test modes are outlined in Table 2. In the test mode, the frequency of the reference clock is divided by 4, 5, or 6. The maximum rise and fall time at the output pins is 1.4 ns. All outputs of the GA1087 are TTL-compatible with 30 mA symmetric drive and a minimum V OH of 2.4 V. Power Up/Reset Synchronization After-power-up or reset, the PLL requires time before it achieves synchronization lock. The maximum time required for synchronization (TSYNC) is 500 ms.
Table 1. Frequency Mode Selection Feedback: Any Group A Output (Q5 - Q10)
Test
0 0 0 0
Select Pins F0
1 0 0 1
F1
0 0 1 1
Mode
/4 /5 /6 Not Used
Reference Clock Frequency Range
70 MHz - 105 MHz 56 MHz - 84 MHz 48 MHz - 70 MHz N.A.
Output Frequency Range Group A: Q5-Q10 Group B: Q0-Q4
70 MHz - 105 MHz 56 MHz - 84 MHz N.A.
1
35 MHz - 52 MHz 28 MHz - 42 MHz 24 MHz - 35 MHz N.A.
48 MHz - 70 MHz
Feedback: Any Group B Output (Q0 - Q4)
Test
0 0 0 0
Select Pins F0
1 0 0 1
F1
0 0 1 1
Mode
/8 / 10 / 12 Not Used
Reference Clock Frequency Range
35 MHz - 52 MHz 28 MHz - 42 MHz 24 MHz - 35 MHz N.A.
Output Frequency Range Group A: Q5-Q10 Group B: Q0-Q4
70 MHz - 105 MHz 56 MHz - 84 MHz 1 48 MHz - 70 MHz N.A. 35 MHz - 52 MHz 28 MHz - 42 MHz 24 MHz - 35 MHz N.A.
Notes: 1. This mode produces outputs with 40/60 duty cycle for Q5 - Q10 only.
2
For additional information and latest specifications, see our website: www.triquint.com
GA1087
Table 2. Test Mode Selection
Test
1 1 1 1
F0
1 0 0 1
F1
0 0 1 1
Mode
/4 /5 /6 --
Ref. Clock
f REF f REF f REF --
Group B: Outputs Q0-Q4
f REF / 8 f REF / 10 f REF / 12 --
Group A: Outputs Q5-Q10
f REF / 4 f REF / 5 f REF / 6 --
Layout Guidelines
Multiple ground and power pins on the GA1087 reduce ground bounce. Good layout techniques, however, are necessary to guarantee proper operation and to meet the specifications across the full operating range. TriQuint recommends bypassing each of the VDD supply pins to the nearest ground pin, as close to the chip as possible. Figure 2 shows the recommended power layout for the GA1087. The bypass capacitors should be located on the same side of the board as the GA1087. The VDD traces connect to an inner-layer VDD plane. All of the ground pins (GND) are connected to a small ground plane on the surface beneath the chip. Multiple through holes connect this small surface plane to an inner-layer ground plane. The capacitors (C1-C5) are 0.1 mF. TriQuint's test board uses X7R temperature-stable capacitors in 1206 SMD cases.
Figure 2. Top Layer Layout of Power Pins (approx. 3.3x)
V DD C4
Pin 1
V DD C3
C2
Pin 15
C5 V DD V DD
C1
For additional information and latest specifications, see our website: www.triquint.com
3
SYSTEM TIMING PRODUCTS
Ground Plane
V DD
GA1087
Absolute Maximum Ratings 1
Storage temperature Ambient temperature with power DC input voltage DC input current Package thermal resistance (MQuad) Die junction temperature applied 2 Supply voltage to ground potential -65 C to +150 C -55 C to +100 C -0.5 V to +7.0 V -0.5 V to (VDD + 0.5) V -30 mA to +5 mA JA = 45 C/W TJ = 150 C
DC Characteristics (VDD = +5 V + 5%, TA = 0 C to +70 C) 3
Symbol
VOHT VOHC VOL VIH 5 VIL5 IIL IIH II IDDS 6 VI
Description
Output HIGH voltage Output HIGH voltage VIN Output LOW voltage VIN Input HIGH level Voltage for all Inputs Input LOW level Voltage for all inputs Input LOW current Input HIGH current Input HIGH current Power supply current Input clamp voltage
Test Conditions
VDD= Min VIN= VIH or VIL VDD = Min = VIH or VIL VDD = Min = VIH or VIL IOH = -30 mA IOH = -1 mA IOL = 30 mA
Min
2.4 3.2
Limits 4 Typ
3.4 4.1 0.27
Max
Units
V V
0.5
V V
Guaranteed input logical HIGH Guaranteed input logical LOW VDD = Max VDD = Max VDD = Max VDD = Max VDD = Min IIN = -18 mA VIN = 0.40 V VIN = 2.7 V VIN = 5.5 V
2.0 0.8 -156 0 2 119 -0.70 -400 25 1000 160 -1.2
V A A A mA V
Capacitance
Symbol
CIN 3,7
Description
Input capacitance
Test Conditions
VIN = 2.0 V at f = 1 MHz
Min
Typ
6
Max
Units
pF
Notes:
1. Exceeding these parameters may damage the device. 2. Maximum ambient temperature with device not switching and unloaded. 3. These values apply to both GA1087-MC500 and GA1087-MC700. 4. Typical limits are at VDD = 5.0 V and TA = 25 C. 5. These are absolute values with respect to device ground and all overshoots due to system or tester noise are included. 6. This parameter is measured with device not switching and unloaded. 7. These parameters are not 100% tested, but are periodically sampled.
4
For additional information and latest specifications, see our website: www.triquint.com
GA1087
AC Characteristics (VDD = +5 V + 5%, TA = 0 C to +70 C)
Symbol
t CPWH t CPWL t IR
Input Clock (REFCLK)
CLK pulse width HIGH CLK pulse width LOW Input rise time (0.8 V - 2.0 V)
Test Conditions (Figure 3) 1
Figure 4 Figure 4
Min
3 3 --
Typ
------
Max
-- -- 2.0
Unit
ns ns ns
Symbol
t OR,t OF t PD1 2 t PD2 2 t SKEW1 3 t SKEW2 3 t SKEW3 3 t SKEW4 3 t CYC 4 t JP
5
Input Clock (Q0-Q10)
Rise/fall time (0.8 V - 2.0 V) CLK to FBIN (GA1087-MC500) CLK to FBIN (GA1087-MC700) Rise-rise, fall-fall (within group) Rise-rise, fall-fall (group-to-group, aligned) Rise-rise, fall-fall (group-to-group, non-aligned) Rise-fall, fall-rise Duty-cycle Variation Period-to-Period Jitter Random Jitter Synchronization Time
Test Conditions (Figure 3) 1
Figure 4 Figure 4 Figure 4 Figure 5 Figure 6 (skew2 takes into account skew1) Figure 7 (skew3 takes into account skews1, 2) Figure 8 (skew4 takes into account skew3) Figure 4 Figure 4 Figure 4
Min
350 -850 -1050 -- -- -- -- -1000 -- -- --
Typ
-- -350 -350 60 75 -- -- 0 80 190 10
Max
1400 +150 +350 150 350 650 1200 +1000 200 400 500
Unit
ps ps ps ps ps ps ps ps ps ps s
t JR 5 t SYNC 6
Notes: 1. All measurements are tested with a REFCLK having a rise time of 0.5 ns (0.8 V to 2.0 V). 2. The PLL maintains alignment of CLK and FBIN at all times. This specification applies to the rising edge only because the input duty cycle can vary. while the output duty cycle is typically 50/50. The delay tPD is measured at the 1.5 V level between CLK and FBIN. 3. Skew specifies the width of the window in which outputs switch, and is measured at 1.5 V. 4. This specification represents the deviation from 50/50 on the outputs. 5. Jitter specifications refer to peak-to-peak value. tJR is the jitter on the output with respect to the reference clock. tJP is the jitter on the output with respect to the output's previous rising edge. 6. tSYNC is the time required for the PLL to synchronize; this assumes the presence of a CLK signal and a connection from one of the outputs to FBIN.
Figure 3. AC Test Circuit
+5 V R1 R2 Z FBIN Q0 Q1 Q2 * * * * Q10 Y 50 X +5 V R1 R2 * * * * +5 V R1 R2 +5 V R1 R2 Notes: R1 = 160 R2 = 71 Y+Z=X
+5 V R1 R2 Z CLK
For additional information and latest specifications, see our website: www.triquint.com
5
SYSTEM TIMING PRODUCTS
GA1087
Switching Waveforms
Figure 4. General Timing
tCPW REFCLK tCPW
t PD1,2 FBIN
t JR
Q0 - Q10 (INDIVIDUALLY)
t PERIOD t JP
Figure 5. tSKEW1
Group B
Figure 7. tSKEW3 (For Group B Feedback)
Period = 1 f REFCLK
f = 2x f REF
Group B t SKEW1 Group A Group A t SKEW1 t SKEW1 t SKEW1
t SKEW3 = Group A t1
Period - t1 2
Figure 6. tSKEW2
Group B
Figure 8. tSKEW4
f = f REF
Group B t2 Period = 1 f REFCLK
Group A t SKEW2
f = 2x f REF
Group A t3 t SKEW4 = Period - t2 = 2 Period - t3 = 4 t4 Period - t4 4
6
For additional information and latest specifications, see our website: www.triquint.com
GA1087
28-Pin MQuad J-Leaded Package Mechanical Specification
(All dimensions in inches)
.172 .005 .490 .005 .045 X 45 .445 .005 .132 .005 .040 MIN
PIN 1 8 0.125 VENT PLUG 15 .015 X 45 22
.490 .005 .445 .005 .445 .028 .005 .018
.410 .015
.050 TYP. .060
.050 TYP. NON-ACCUM.
.104 .005
28-Pin MQuad Pin Description
SYSTEM TIMING PRODUCTS
Pin #
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Pin Name
GND Q9 Q10 VDD GND F0 F1 GND REFCLK GND FBIN TEST VDD Q0
Description
Ground Output Clock 9 (A5) Output Clock 10 (A6) +5 V Ground Frequency Select 0 Frequency Select 1 Ground Reference Clock Ground Feedback In Test +5 V Output Clock 0 (B1)
I/O
-- O O -- -- I I -- I -- I I -- O
Pin #
15 16 17 18 19 20 21 22 23 24 25 26 27 28
Pin Name
GND Q1 Q2 VDD GND Q3 Q4 VDD Q5 Q6 GND VDD Q7 Q8
Description
Ground Output Clock 1 (B2) Output Clock 2 (B3) +5 V Ground Output Clock 3 (B4) Output Clock 4 (B5) +5 V Output Clock 5 (A1) Output Clock 6 (A2) Ground +5 V Output Clock 7 (A3) Output Clock 8 (A4)
I/O
For additional information and latest specifications, see our website: www.triquint.com
7
GA1087
Output Characteristics
The IV characteristics, transition times, package characteristics, device and bond wire-characteristics for the QA1087 are described in Tables 4 through 9 and Figures 9 through 11. These output characteristics are provided for modeling purposes only. TriQuint does not guarantee the information in these tables and figures.
Figure 9. IOH vs.VOH
HIGH
0 -20 -40 0.0 1.0 2.0 3.0 4.0 5.0
VOH min VOH max
Figure 10. IOL vs.VOL
LOW
160 140 120
VOL min VOL max
IOH (mA)
-60 -80 -100 -120 -140 -160
IOL (mA)
100 80 60 40 20 0
Volts
0.0
1.0
2.0
3.0
4.0
5.0
Volts
Table 4. IOH vs.VOH
VOL
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0
Table 5. IOL vs.VOL
IOL max (mA)
-160 -157 -152 -142 -130 -106 -79 -42 0 0 0 0 0 0 1 5
IOL min (mA)
-70 -70 -68 -65 -59 -48 -29 0 0 0 0 0 0 0 0 0
VOL
-2.5 -2.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 10.0
IOL min (mA)
-145 -135 -115 -90 -40 0 37 49 53 54 54 54 54 54 54 54 54
IOL max (mA)
-435 -410 -350 -265 -120 0 97 140 155 157 159 160 160 160 160 160 160
Notes:
1. These are worst-case corners for process, voltage, and temperature.
2. Includes diode to ground current.
8
For additional information and latest specifications, see our website: www.triquint.com
GA1087
Table 6. Above-VDD and Below-Ground Characteristics
Diode to GND V
0.0 -0.4 -0.5 -0.6 -0.7 -0.8 -0.9 -1.0 -2.0 -2.5 -3.0
Table 9. Rise and Fall Times (Into 0 pF, 50 Ohms to 1.5 V)
Time (ns) TR min (V) TR max (V) TF min (V) TF max (V)
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0.15 0.15 0.16 0.18 0.23 0.26 0.34 0.46 0.67 0.89 1.12 1.32 1.50 1.73 1.93 2.15 2.75 2.58 2.75 2.90 3.02 3.12 3.17 3.19 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 0.32 0.32 0.32 0.32 0.32 0.32 0.32 0.34 0.39 0.49 0.63 0.86 1.09 1.27 1.45 1.64 2.23 2.00 2.23 2.41 2.50 2.64 2.77 2.86 2.95 2.99 3.02 3.02 3.04 3.04 3.04 3.04 3.04 3.04 3.04 3.20 3.20 3.06 2.86 2.62 2.38 2.17 2.00 1.85 1.69 1.52 1.38 1.26 1.12 0.96 0.83 0.52 0.61 0.52 0.45 0.39 0.33 0.29 0.24 0.21 0.19 0.17 0.16 0.16 0.15 0.15 0.15 0.15 0.15 0.15 3.04 3.04 2.95 2.90 2.68 2.50 2.36 2.22 2.09 1.95 1.86 1.68 1.59 1.49 1.36 1.23 0.95 1.00 0.95 0.91 0.77 0.73 0.68 0.64 0.59 0.55 0.53 0.50 0.45 0.41 0.40 0.37 0.36 0.32
I (mA)
0 0 0 -5 -15 -35 -55 -75 -300 -350 -360
Diode Stack to VDD V I (mA)
5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 0 0 0 0 0 1 5 9
Note:
TriQuint does not guarantee diode operation for purposes other than ESD protection.
Figure 11. Output Model
L1 DIE C1 C2 L2 OUTPUT
1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3
Table 7. Device and Bond-Wire Characteristics (Estimates)
L1
2 nH
2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2
C1
10 pF
Table 8. 28-Pin MQuad Package Characteristics
L1
1.85 nH
3.3 3.4
C1
0.40 pF
For additional information and latest specifications, see our website: www.triquint.com
9
SYSTEM TIMING PRODUCTS
0.86
GA1087
Ordering Information
To order, please specify as shown below:
GA1087-MC nnn
11-Output Configurable Clock Buffer
Propagation delay skew:
500 700
-350 ps 500 ps -350 ps 700 ps
Note: All parts are marked as MC500. MC700 parts have a "2" added to the marking.
Temperature range: 0 C to 70 C (Commercial) Package: MQuad
Additional Information
For latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: sales@tqs.com Tel: (503) 615-9000 Fax: (503) 615-8900
For technical questions and additional information on specific applications: Email: applications@tqs.com
The information provided herein is believed to be reliable; TriQuint assumes no liability for inaccuracies or omissions. TriQuint assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. TriQuint does not authorize or warrant any TriQuint product for use in life-support devices and/or systems. Copyright (c) 1997 TriQuint Semiconductor, Inc. All rights reserved. Revision 1.1.A November 1997
10
For additional information and latest specifications, see our website: www.triquint.com

▲Up To Search▲

Price & Availability of GA1087

	To Download GA1087 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .